Below you'll find our most current stock number information. These days, most people prefer two-piece bases, so we've emphasized them below.

We've upgraded the finishes on our entry-level Huntur and Gunnur bases to match their rings. Huntur bases now have angular corners and a satin finish. Gunnur bases have angular corners, a gloss finish, and stainless steel cone screws. Huntur (satin) and Gunnur (glossy) rings continue as our entry-level rings.

Classic Huntur bases are no longer listed. Their sanding-belt finish just seemed too plain for fine firearms. But we do realize that knockabout firearms may not need "designer" bases, so we'll continue to make Classic Huntur bases available by special request. Just specify S1 or S2 instead of H1 or H2 at the end the Huntur base stock numbers below.

Limited and Custum continue as our standard premium lines of bases and rings, Limited with a satin finish, Custum with a gloss finish. Limited and Custum bases have contoured (rounded) corners. Limited and Custum rings have ring-stud screws. (Ring-stud screws keep the rings clamped onto the scope tube whenever the scope is removed from the base, unnecessary if you rarely remove your scope.) Custum bases also have stainless steel cone screws.

We've added our lightweight Fluted two-piece bases (satin) to the listing below. Fluted bases require additional post-production machining and may not always be immediately available.

Satin stainless steel two-piece bases are also available for many popular guns (check for availability on our Specialty Rings & Bases page). Add -SS after the Huntur, Limited, or Fluted stock numbers below. Stainless steel bases come with stainless steel cone screws.

If you'd like to download a PDF version to your hard drive (which we suggest for printing), please use the links below:

Conetrol Base Stock Numbers.pdf
Conetrol Ring Stock Numbers.pdf

1. Right click the link above (MAC: Control+click).
2. Click "Save link as..." (or "Save target as...").
3. Decide where to put the file, then click save.
4. Locate the file on your computer and open it.
Base Stock Numbers
GUN MAKE & MODEL BRIDGE BASES
(Four Grades)		 HUNTUR
2-Pc.		 GUNNUR
2-Pc.		 LIMITED
2-Pc.		 CUSTUM
2-Pc.		 FLUTED
2-Pc.
ALPHA I - ALPHAH2 ALPHAG2 ALPHAL2 ALPHAC2 ALPHAF2
  • Ring-Extending Base
 - ALPHAXH2 ALPHAXG2 ALPHAXL2 ALPHAXC2 ALPHAXF2
ALPINE Supreme FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
ANSCHUTZ Rimfires/Small Calibers (Screw Attachment) 153(H/G/L/C)1 45H059H2 45H059G2 45H059L2 45H059C2 45H059F2
  • Extra-High Base
 - 53H059H2 53H059G2 53H059L2 53H059C2 53H059F2
  • Receiver Diameter Under One Inch
 - 2H589H2 2H589G2 2H589L2 2H589C2 2H589F2
ANSCHUTZ 1568 - ALPHAH2 ALPHAG2 ALPHAL2 ALPHAC2 ALPHAF2
ANSCHUTZ 1574 - KRICOH2 KRICOG2 KRICOL2 KRICOC2 KRICOF2
ANSCHUTZ 1727 - 3T059H2 3T059G2 3T059L2 3T059C2 3T059F2
ARISAKA, Japanese JAP(H/G/L/C)1 JAPH2 JAPG2 JAPL2 JAPC2 JAPF2
ARNOLD ARMS CO. Apollo - DGAH2 DGAG2 DGAL2 DGAC2 DGAF2
AUSTIN & HALLECK 420 LR - 45T059H2 45T059G2 45T059L2 45T059C2 45T059F2
BENELLI Super Black Eagle Shotgun - 4&6H2 4&6G2 4&6L2 4&6C2 4&6F2
BENELLI R1 Rifle - BLRH2 BLRG2 BLRL2 BLRC2 BLRF2
BERETTA Mato Rifle - E70MH2 E70MG2 E70ML2 E70MC2 E70MF2
BERETTA Pintail Shotgun - 45T549#8H2 45T549#8G2 45T549#8L2 45T549#8C2 45T549#8F2
BERETTA SAKO Rifles - See SAKO -
BERGARA Short B14 Actions (Specify if Premier Series with 8-40 Screws) 722(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
BERGARA Long B14 Actions (Specify if Premier Series with 8-40 Screws) 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base (Specify if Premier Series with 8-40 Screws)
 - 700XH2 700XG2 700XL2 700XC2 700XF2
BLASER Rifle, Original Model BLASR(H/G/L/C)1 - - - - -
BRNO MAUSER, Round Receiver (Commercial) HVA(H/G/L/C)1 HVAH2 HVAG2 HVAL2 HVAC2 HVAF2
  • Ring-Extending Base
 - HVAXH2 HVAXG2 HVAXL2 HVAXC2 HVAXF2
BRNO ZKK - BRNDTH2 BRNDTG2 BRNDTL2 BRNDTC2 BRNDTF2
BRNO ZKB, ZKM, ZKW - SBRNDTH2 SBRNDTG2 SBRNDTL2 SBRNDTC2 SBRNDTF2
  • Ring-Extending Base
 - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
BRNO 98 - FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
BROWNING A-Bolt - 1T567H2 1T567G2 1T567L2 1T567C2 1T567F2
BROWNING A-Bolt Short Action (.560" Rear Screw-Spacing) - SSABOLTH2 SSABOLTG2 SSABOLTL2 SSABOLTC2 SSABOLTF2
BROWNING A-Bolt Shotgun - ABSHOTH2 ABSHOTG2 ABSHOTL2 ABSHOTC2 ABSHOTF2
BROWNING A-Bolt Mountain Ti (Titanium) - ABOLTTH2 ABOLTTG2 ABOLTTL2 ABOLTTC2 ABOLTTF2
BROWNING T-Bolt - 2H589H2 2H589G2 2H589L2 2H589C2 2H589F2
BROWNING X-Bolt - XBOLTH2 XBOLTG2 XBOLTL2 XBOLTC2 2H589F2
  • Ring-Extending Base
 - XBOLTXH2 XBOLTXG2 XBOLTXL2 XBOLTXC2 -
BROWNING BAR and BPR BAR(H/G/L/C)1 BARH2 BARG2 BARL2 BARC2 BARF2
  • Extra-High Base
 - 2H539H2 2H539G2 2H539L2 2H539C2 2H539F2
BROWNING BBR - BBRH2 BBRG2 BBRL2 BBRC2 BBRF2
  • Ring-Extending Base
 - BBRXH2 BBRXG2 BBRXL2 BBRXC2 BBRXF2
BROWNING BLR Short Action - BLRH2 BLRG2 BLRL2 BLRC2 BLRF2
BROWNING BLR Long Action BLR(H/G/L/C)1 BLRH2 BLRG2 BLRL2 BLRC2 BLRF2
BROWNING Buck Mark Pistols Made to Use Weaver Rings - WVRDTH2 WVRDTG2 WVRDTL2 WVRDTC2 WVRDTF2
BROWNING Euro-Bolt - 3T059H2 3T059G2 3T059L2 3T059C2 3T059F2
BROWNING FN FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
BROWNING Short FN (.243 and .308) SFN(H/G/L/C)1 SFNH2 SFNG2 SFNL2 SFNC2 SFNF2
BROWNING Mountain Rifle TC(H/G/L/C)1 - - - - -
BROWNING SAKO (.222, etc.) 461(H/G/L/C)1 461H2 461G2 461L2 461C2 461F2
BROWNING SAKO (.243, etc.) 579(H/G/L/C)1 579H2 579G2 579L2 579C2 579F2
BROWNING 52 WINCHESTER - 45T559H2 45T559G2 45T559L2 45T559C2 45T559F2
BROWNING B-78, Round Barrel, for 1" Rings** - RB78H2 RB78G2 RB78L2 RB78C2 RB78F2
BROWNING B-78, Round Barrel, Low Mount, Rear Ring Over Barrel - RB78LH2 RB78LG2 RB78LL2 RB78LC2 RB78LF2
BROWNING B-78, Octagon Barrel, Smaller Calibers, for 1" Rings* - OB78H2 OB78G2 OB78L2 OB78C2 OB78F2
BROWNING B-78, Octagon Barrel, Smaller Calibers, for 30mm Rings* - OB7830H2 OB7830G2 OB7830L2 OB7830C2 OB7830F2
BROWNING B-78, Octagon Barrel, .45-70 Government - HW1885H2 HW1885G2 HW1885L2 HW1885C2 HW1885F2
BROWNING 1885 High-Wall - HW1885H2 HW1885G2 HW1885L2 HW1885C2 HW1885F2
BROWNING 1885 Low-Wall for 1" Rings** - LW1885H2 LW1885G2 LW1885L2 LW1885C2 LW1885F2
BROWNING 1885 Low-Wall for 30mm Rings** - LW188530H2 LW188530G2 LW188530L2 LW188530C2 LW188530F2
BSA, .308 and Shorter Cartridges MBSA(H/G/L/C)1 77H2 77G2 77L2 77C2 77F2
  • Ring-Extending Base
 - 77XH2 77XG2 77XL2 77XC2 77XF2
BSA, .270 and Longer Cartridges 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
BSA, Dovetailed, .30-06 and Shorter Cartridges - MBSADTH2 MBSADTG2 MBSADTL2 MBSADTC2 MBSADTF2
BSA, Dovetailed, .264 Winchester Magnum and Longer Cartridges - LBSADTH2 LBSADTG2 LBSADTL2 LBSADTC2 LBSADTF2
BSA Century (Rimfire) - SBRNDTH2 SBRNDTG2 SBRNDTL2 SBRNDTC2 SBRNDTF2
  • Ring-Extending Base
 - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
CARL GUSTAF HUSQVARNA CG(H/G/L/C)1 CGH2 CGG2 CGL2 CGC2 CGF2
  • Left-Hand Action
 CGL(H/G/L/C)1 CGH2 CGG2 CGL2 CGC2 CGF2
  • Ring-Extending Base
 - HVAXH2 HVAXG2 HVAXL2 HVAXC2 HVAXF2
CARL GUSTAF 2000 - 3T549XH2 3T549XG2 3T549XL2 3T549XC2 3T549XF2
CARL GUSTAF 3000, 4000 - SAURH2 SAURG2 SAURL2 SAURC2 SAURF2
  • Ring-Extending Base
 - 3T549XH2 3T549XG2 3T549XL2 3T549XC2 3T549XF2
CHAMPLIN Big Game Rifle CH(H/G/L/C)1 CHH2 CHG2 CHL2 CHC2 CHF2
CHRISTENSEN Bolt Actions With Same Shape Front/Rear (6-48 Drilling) - 45T039H2 45T039G2 45T039L2 45T039C2 45T039F2
  • Ring-Extending Base
 - 45T039XH2 45T039XG2 45T039XL2 45T039XC2 45T039XF2
CHRISTENSEN Bolt Actions With Same Shape Front/Rear (8-40 Drilling) - 45T039#8H2 45T039#8G2 45T039#8L2 45T039#8C2 45T039#8F2
  • Ring-Extending Base
 - 45T039#8XH2 45T039#8XG2 45T039#8XL2 45T039#8XC2 45T039#8XF2
CHRISTENSEN Short Bolt Actions Like Remington 700s (6-48 Drilling) 722(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
CHRISTENSEN Short Bolt Actions Like Remington 700s, Left-Hand (6-48 Drilling) 722L(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
CHRISTENSEN Long Bolt Actions Like Remington 700s (6-48 Drilling) 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
CHRISTENSEN Long Bolt Actions Like Remington 700s, Left-Hand (6-48 Drilling) 721L(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
COLT AR-15, AR-16 AR15(H/G/L/C)1 - - - - -
COLT Coltsman 57, 58 FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
COLT SAUER Bolt-Action - See SAUER -
COOPER Small Calibers - 45HT569H2 45HT569G2 45HT569L2 45HT569C2 45HT569F2
  • Non-Overhanging Base for Cooper 21, etc. With Short Bridge, 1" Rings*
 - KMBRH2 KMBRG2 KMBRL2 KMBRC2 KMBRF2
  • Non-Overhanging Base for Above Rifles, 30mm Rings*
 - KMBR30H2 KMBR30G2 KMBR30L2 KMBR30C2 KMBR30F2
COOPER 22, 52, 54, Large Calibers - HB61RH2 HB61RG2 HB61RL2 HB61RC2 HB61RF2
  • Non-Overhanging Base for Cooper 22, 52, 54, Large Calibers, 1" Rings*
 - LCOOPRH2 LCOOPRG2 LCOOPRL2 LCOOPRC2 LCOOPRF2
  • Non-Overhanging Base for Cooper 22, 52, 54, Large Calibers, 30mm" Rings*
 - HB579H2 HB579G2 HB579L2 HB579C2 HB579F2
CZ-USA Rifles With Rimfire Tip-Off Grooves - RFDTH2 RFDTG2 RFDTL2 RFDTC2 RFDTF2
CZ-USA Rifles with Dovetail 3/4" Wide - CZDTH2 CZDTG2 CZDTL2 CZDTC2 CZDTF2
CZ-USA Rifles with Dovetail 5/8" Wide - SCZDTH2 SCZDTG2 SCZDTL2 SCZDTC2 SCZDTF2
  • Ring-Extending Base
 - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
DAKOTA 76 (Advise Whether Drilled 6-48 or 8-40) - E70MH2 E70MG2 E70ML2 E70MC2 E70MF2
  • Ring-Extending Base
 - E70MXH2 E70MXG2 E70MXL2 E70MXC2 E70MXF2
DAKOTA 22 Long Rifle - DAK22H2 DAK22G2 DAK22L2 DAK22C2 DAK22F2
EMPIRE MAUSER (Screw Attachment) - EMPIREH2 EMPIREG2 EMPIREL2 EMPIREC2 EMPIREF2
ENFIELD '17, Bridge Flat, .090" Below Front ENF(H/G/L/C)1 ENFH2 ENFG2 ENFL2 ENFC2 ENFF2
ENFIELD '17, Bridge Round Like Front 30(H/G/L/C)1 30H2 30G2 30L2 30C2 30F2
  • Ring-Extending Base
 - 30XH2 30XG2 30XL2 30XC2 30XF2
FFV - See CARL GUSTAF HUSQVARNA -
FN MAUSER (Commercial) FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
GONIC ARMS GA-87 - 51H599H2 51H599G2 51H599L2 51H599C2 51H599F2
HAENEL Single-Shot - SBRNDTH2 SBRNDTG2 SBRNDTL2 SBRNDTC2 SBRNDTF2
HALL Standard Action - 45T539H2 45T539G2 45T539L2 45T539C2 45T539F2
HALL Mod. B - 45T088H2 45T088G2 45T088L2 45T088C2 45T088F2
HALL Mod. M - 45T019H2 45T019G2 45T019L2 45T019C2 45T019F2
H&R Ultra Automatic ULTM(H/G/L/C)1 ULTMH2 ULTMG2 ULTML2 ULTMC2 ULTMF2
H&R Ultra "Wildcat," Dovetailed - 461DTH2 461DTG2 461DTL2 461DTC2 461DTF2
H&R MAUSER-Style Bolt-Action FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
H&R SAKO Round Receivers - See SAKO ROUND RECEIVERS -
H&R Single-Shot Center Fires HR700(H/G/L/C)1 - - - - -
H&R 700, SB-2, Topper 158 HR700(H/G/L/C)1 - - - - -
HART No. 1 - 45T029H2 45T029G2 45T029L2 45T029C2 45T029F2
HART No. 1A Action - 45T508H2 45T508G2 45T508L2 45T508C2 45T508F2
HART No. 2A Action - 45T019H2 45T019G2 45T019L2 45T019C2 45T019F2
HART No. 4 Action - 45T088H2 45T088G2 45T088L2 45T088C2 45T088F2
HECKLER & KOCH With Slope on Each Side of Receiver Top H&KDT(H/G/L/C)1 - - - - -
HECKLER & KOCH Round Receiver With Mounting Rib H&KDT(H/G/L/C)1 H&KDTH2 H&KDTG2 H&KDTL2 H&KDTC2 H&KDTF2
HECKLER & KOCH HK-BASR - 45T529H2 45T529G2 45T529L2 45T529C2 45T529F2
HECKLER & KOCH SLB 2000 (Confirm Screw Size/Spacing) - 742H2 742G2 742L2 742C2 742F2
HENRY Centerfires (Flat-Top) 336(H/G/L/C)1 336H2 336G2 336L2 336C2 336F2
HERTER J9 MAUSER FN(H/G/L/C)1 J9H2 J9G2 J9L2 J9C2 J9F2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
HERTER U9, .308 and Shorter MBSA(H/G/L/C)1 77H2 77G2 77L2 77C2 77F2
HERTER U9, .270 and Longer 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
HERTER U9, Dovetailed, .308 and Shorter - MBSADTH2 MBSADTG2 MBSADTL2 MBSADTC2 MBSADTF2
HERTER U9, Dovetailed, .270 and Longer - LBSADTH2 LBSADTG2 LBSADTL2 LBSADTC2 LBSADTF2
HEYM SR-20 - 3000H2 3000G2 3000L2 3000C2 3000F2
  • Ring-Extending Base
 - 3000XH2 3000XG2 3000XL2 3000XC2 3000XF2
HEYM SR-40 - 53H059H2 53H059G2 53H059L2 53H059C2 53H059F2
HOWA 1500, Short Action 722(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
HOWA 1500 Super Lite, Short Action (Bridge Base Uses Only One Rear Attachment Screw) 722(H/G/L/C)1 HOWASLH2 HOWASLG2 HOWASLL2 HOWASLC2 HOWASLF2
HOWA 1500, Long Action 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
HUSQVARNA HVA HVA(H/G/L/C)1 HVAH2 HVAG2 HVAL2 HVAC2 HVAF2
  • Ring-Extending Base
 - HVAXH2 HVAXG2 HVAXL2 HVAXC2 HVAXF2
HUSQVARNA. Large-Ring FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
       Ring-Extending Base - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
HUSQVARNA 1900, 8000, 9000 CG(H/G/L/C)1 CGH2 CGG2 CGL2 CGC2 CGF2
  • Ring-Extending Base
 - HVAXH2 HVAXG2 HVAXL2 HVAXC2 HVAXF2
INTERARMS Mark X, Whitworth FN(H/G/L/C)1 J9H2 J9G2 J9L2 J9C2 J9F2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
INTERARMS Firearms Made by HOWA - See HOWA -
INTERARMS Mini-Mark X - MMSRH2 MMSRG2 MMSRL2 MMSRC2 MMSRF2
INTERARMS Virginia Dragoon Revolver - ULTMH2 ULTMG2 ULTML2 ULTMC2 ULTMF2
ITHACA Firearms Made by TIKKA - See TIKKA -
ITHACA 87 Deer Slayer II 742(H/G/L/C)1 742H2 742G2 742L2 742C2 742F2
KDF (KLEINGUENTHER) K-14, Shikar (Flat-Top) - VOERH2 VOERG2 VOERL2 VOERC2 VOERF2
  • Ring-Extending Base
 - VOERXH2 VOERXG2 VOERXL2 VOERXC2 VOERXF2
KDF (KLEINGUENTHER) K-15 - K15H2 K15G2 K15L2 K15C2 K15F2
  • Ring-Extending Base
 - K15XH2 K15XG2 K15XL2 K15XC2 K15XF2
KDF (KLEINGUENTHER) K-16 - 53H069H2 53H069G2 53H069L2 53H069C2 53H069F2
KDF (KLEINGUENTHER) K-22 (Screw Attachment) - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
KIMBER FIREARMS NOTE: Newer Kimber Firearms May Be Drilled and Tapped for Larger 8-40 Screws Instead of 6-48s. Please Specify Screw Size.
KIMBER, 1.300" Diam. Receiver, Bridge Round Like Front - HB61RH2 HB61RG2 HB61RL2 HB61RC2 HB61RF2
KIMBER Big-Game Rifle - BGRH2 BGRG2 BGRL2 BGRC2 BGRF2
  • Ring-Extending Base
 - 70XH2 70XG2 70XL2 70XC2 70XF2
  • With Integral Dovetail
 - BGRDTH2 BGRDTG2 BGRDTL2 BGRDTC2 BGRDTF2
KIMBER 84, 84L, 84M, Predator Pistol, etc. With Different Screw-Spacing Front and Rear - 45HT569H2 45HT569G2 45HT569L2 45HT569C2 45HT569F2
  • Non-Overhanging Base for Above Rifles With Short Bridge, 1" Rings*
 - KMBRH2 KMBRG2 KMBRL2 KMBRC2 KMBRF2
  • Non-Overhanging Base for Above Rifles, 30mm Rings*
 - KMBR30H2 KMBR30G2 KMBR30L2 KMBR30C2 KMBR30F2
KIMBER 82 With 0.860" Screw-Spacing Front and Rear - 4T569H2 4T569G2 4T569L2 4T569C2 4T569F2
  • Grooved-Receiver Base
 - BGRDTH2 BGRDTG2 BGRDTL2 BGRDTC2 BGRDTF2
KIMBER 82, 82C, 84C, Mini-Mauser (1/2" Screw-Spacing Front and Rear) - 53H569H2 53H569G2 53H569L2 53H569C2 53H569F2
KIMBER Swedish MAUSER 96 - SRMH2 SRMG2 SRML2 SRMC2 SRMF2
  • Ring-Extending Base
 - SRMXH2 SRMXG2 SRMXL2 SRMXC2 SRMXF2
KIMBER MAUSER 98 - J9H2 J9G2 J9L2 J9C2 J9F2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
KIMBER K770, Long Action 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
KIMBER 8400 - 8400H2 8400G2 8400L2 8400C2 8400F2
  • Ring-Extending Base
 - 8400XH2 8400XG2 8400XL2 8400XC2 8400XF2
KNIGHT Rifles - See MODERN MUZZLE LOADING -
KRAG SMR(H/G/L/C)1 - - - - -
KRICO, Round Receiver - KRICOH2 KRICOG2 KRICOL2 KRICOC2 KRICOF2
KRICO, Dovetailed Receiver - SBRNDTH2 SBRNDTG2 SBRNDTL2 SBRNDTC2 SBRNDTF2
  • Ring-Extending Base
 - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
LEGENDARY ARMS WORKS 704 - 45T039#8H2 45T039#8G2 45T039#8L2 45T039#8C2 45T039#8F2
  • Ring-Extending Base
 - 45T039#8XH2 45T039#8XG2 45T039#8XL2 45T039#8XC2 45T039#8XF2
MAGNUM RESEARCH Short Action 722(H/G/L/C)1 77H2 77G2 77L2 77C2 77F2
MAGNUM RESEARCH Long Action 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
MANNLICHER-SCHONAUER M-72 (STEYR) - 72H2 72G2 72L2 72C2 72F2
MANNLICHER-SCHONAUER, Older Split-Bridge Model - Please Contact Us for Options -
MARLIN Camp Carbine - 336H2 336G2 336L2 336C2 336F2
MARLIN MR-7, XL-7 70(H/G/L/C)1 70H2 70G2 70L2 70C2 70F2
MARLIN 39A 39A(H/G/L/C)1 - - - - -
MARLIN 36, 336, 922, 1895 336(H/G/L/C)1 336H2 336G2 336L2 336C2 336F2
MARLIN 455 FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
MARLIN 1894, 444 Sporter - 336H2 336G2 336L2 336C2 336F2
MAUSER, Most Commercial Versions FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
MAUSER, Large-Ring (Military, 0.435" Rear Screw-Spacing) LRM(H/G/L/C)1 LRMH2 LRMG2 LRML2 LRMC2 LRMF2
  • Ring-Extending Base
 - LRMXH2 LRMXG2 LRMXL2 LRMXC2 LRMXF2
MAUSER, Large-Ring, Short (Military, 0.435" Rear Screw-Spacing) SLRM(H/G/L/C)1 LRMH2 LRMG2 LRML2 LRMC2 LRMF2
MAUSER, Small-Ring (Military, 0.435" Rear Screw-Spacing) SRM(H/G/L/C)1 SRMH2 SRMG2 SRML2 SRMC2 SRMF2
  • Ring-Extending Base
 - SRMXH2 SRMXG2 SRMXL2 SRMXC2 SRMXF2
MAUSER, Small-Ring, Short (Military, 0.435" Rear Screw-Spacing) SSRM(H/G/L/C)1 SRMH2 SRMG2 SRML2 SRMC2 SRMF2
MAUSER 201 (Rimfire, Screw Attachment) - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
MAUSER 77 - MSR77H2 MSR77G2 MSR77L2 MSR77C2 MSR77F2
MAUSER 99, 2250 - K15H2 K15G2 K15L2 K15C2 K15F2
       Ring-Extending Base - K15XH2 K15XG2 K15XL2 K15XC2 K15XF2
MAUSER 66/660, 7mm Remington Magnum and Smaller (Requires Drilling and Tapping for Front Segment) - S66H2 S66G2 S66L2 S66C2 S66F2
       Non-Overhanging Rear, for 1" Rings* - S661H2 S661G2 S661L2 S661C2 S661F2
       Non-Overhanging Rear, for 30mm Rings* - S6630H2 S6630G2 S6630L2 S6630C2 S6630F2
MAUSER 66/660, .375 H&H and Larger (Requires Drilling and Tapping for Front Segment) - L66H2 L66G2 L66L2 L66C2 L66F2
MAUSER SR-20, 2000, 3000 - 3000H2 3000G2 3000L2 3000C2 3000F2
       Ring-Extending Base - 3000XH2 3000XG2 3000XL2 3000XC2 3000XF2
MAUSER SR-40, 4000 - 53H059H2 53H059G2 53H059L2 53H059C2 53H059F2
McMILLAN Bolt Action - 3T549H2 3T549G2 3T549L2 3T549C2 3T549F2
       Ring-Extending Base - 3T549XH2 3T549XG2 3T549XL2 3T549XC2 3T549XF2
MIDLAND* - 2100H2 2100G2 2100L2 2100C2 2100F2
MODERN MUZZLE LOADING Flat-Top With .860" Screw-Spacing - DGAH2 DGAG2 DGAL2 DGAC2 DGAF2
MODERN MUZZLE LOADING Legend With 1/2" Screw-Spacing - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
MODERN MUZZLE LOADING Legend With .860" Screw-Spacing - 31T389H2 31T389G2 31T389L2 31T389C2 31T389F2
MODERN MUZZLE LOADING Guns With 1.125" Diameter Receiver - 53H069H2 53H069G2 53H069L2 53H069C2 53H069F2
MOSSBERG Firearms Made by HOWA - See HOWA -
MOSSBERG 472 - 45H068H2 45H068G2 45H068L2 45H068C2 45H068F2
MOSSBERG 500 Shotgun - 45H019H2 45H019G2 45H019L2 45H019C2 45H019F2
MOSSBERG 695 Bolt Shotgun - 2H539H2 2H539G2 2H539L2 2H539C2 2H539F2
MOSSBERG 835 Shotgun - 45H019#8H2 45H019#8G2 45H019#8L2 45H019#8C2 45H019#8F2
MOSSBERG 800* - 800H2 800G2 800L2 800C2 800F2
MOSSBERG 810, 812, RM-7 - 810H2 810G2 810L2 810C2 810F2
MUSGRAVE Mark I, Mark II - MSGRVH2 MSGRVG2 MSGRVL2 MSGRVC2 MSGRVF2
MUSGRAVE Mark III, Mark IV - FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
MUSGRAVE 85, 90 - 70H2 70G2 70L2 70C2 70F2
  • Ring-Extending Base
 - 70XH2 70XG2 70XL2 70XC2 70XF2
NESIKA Regular Action - 45T039#8H2 45T039#8G2 45T039#8L2 45T039#8C2 45T039#8F2
NESIKA K Action - 45T029#8H2 45T029#8G2 45T029#8L2 45T029#8C2 45T029#8F2
NESIKA L Action - 45T088#8H2 45T088#8G2 45T088#8L2 45T088#8C2 45T088#8F2
NIKKO Golden Eagle - 7000H2 7000G2 7000L2 7000C2 7000F2
  • Ring-Extending Base
 - 7000XH2 7000XG2 7000XL2 7000XC2 7000XF2
NOSLER Mod. 48 (Short or Long) - 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
OMEGA III - OMGH2 OMGG2 OMGL2 OMGC2 OMGF2
PARKER-HALE Bolt-Action FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
PARKER-HALE Hussar (Dovetailed) - BRNDTH2 BRNDTG2 BRNDTL2 BRNDTC2 BRNDTF2
PICATINNY RAILS (Various Guns) - WVRDTH2 WVRDTG2 WVRDTL2 WVRDTC2 WVRDTF2
RANGER ARMS - See TEXAS MAGNUM/MAVERICK -
REMINGTON Mod. 4, Mod. 6 - 4&6H2 4&6G2 4&6L2 4&6C2 4&6F2
  • Ring-Extending Base
 - 4&6XH2 4&6XG2 4&6XL2 4&6XC2 4&6XF2
REMINGTON Mod. 7, 673 (With Two Screw-Holes in Bridge) 600(H/G/L/C)1 600H2 600G2 600L2 600C2 600F2
  • Ring-Extending Base
 - 600XH2 600XG2 600XL2 600XC2 600XF2
REMINGTON 30-S 30(H/G/L/C)1 30H2 30G2 30L2 30C2 30F2
  • Ring-Extending Base
 - 30XH2 30XG2 30XL2 30XC2 30XF2
REMINGTON XP-100 Pistol 600(H/G/L/C)1 600H2 600G2 600L2 600C2 600F2
  • 3-Ring Base
 6003(H/G/L/C)1 - - - - -
  • Short-Ring-Spacing Base
 SRS600(H/G/L/C)1 - - - - -
  • Scope Location on Barrel Rib
 F600(H/G/L/C)1 - - - - -
REMINGTON 241 - 45T539XH2 45T539XG2 45T539XL2 45T539XC2 45T539XF2
REMINGTON 504 - 45P059H2 45P059G2 45P059L2 45P059C2 45P059F2
REMINGTON 541 (Screw Attachment) - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
REMINGTON 600, 660 (With One Screw-Hole in Bridge, Two-Piece Base Requires Drilling and Tapping of Second Hole in Bridge) 600(H/G/L/C)1 600H2 600G2 600L2 600C2 600F2
  • Forward Scope Location
 M600(H/G/L/C)1 - - - - -
REMINGTON Short 700, 722, 725, 40X, ETRONX 722(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
REMINGTON Short 700, Left-Hand 722L(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
REMINGTON Long 700, 721, 725, 40X 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
REMINGTON Long 700, Left-Hand 721L(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base
 - 700XH2 700XG2 700XL2 700XC2 700XF2
REMINGTON 710 - 150R56H2 150R56G2 150R56L2 150R56C2 150R56F2
REMINGTON 740, 742, 760 742(H/G/L/C)1 742H2 742G2 742L2 742C2 742F2
REMINGTON 783 - 45T039H2 45T039G2 45T039L2 45T039C2 45T039F2
  • Ring-Extending Base
 - 45T039XH2 45T039XG2 45T039XL2 45T039XC2 45T039XF2
REMINGTON Short 788 (.44 Mag, etc.) S788(H/G/L/C)1 788H2 788G2 788L2 788C2 788F2
REMINGTON Long 788 (.222, .22-250, .30-30, etc.) L788(H/G/L/C)1 788H2 788G2 788L2 788C2 788F2
REMINGTON Extra-Long 788 (.243, 6mm Rem., .308, etc.) XL788(H/G/L/C)1 788H2 788G2 788L2 788C2 788F2
  • Ring-Extending Base
 - 788XH2 788XG2 788XL2 788XC2 788XF2
REMINGTON 798 MAUSER - J9H2 J9G2 J9L2 J9C2 J9F2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
REMINGTON 799 Mini-Mauser - MMSRH2 MMSRG2 MMSRL2 MMSRC2 MMSRF2
REMINGTON Shotguns 870, 1100 - 45T539H2 45T539G2 45T539L2 45T539C2 45T539F2
REMINGTON 750, 7400, 7600 - 7400H2 7400G2 7400L2 7400C2 7400F2
  • Ring-Extending Base
 - 7400XH2 7400XG2 7400XL2 7400XC2 7400XF2
RIMFIRE-TYPE TIP-OFF GROOVED RECEIVERS (Open-Ended Grooves on Various Guns) - RFDTH2 RFDTG2 RFDTL2 RFDTC2 RFDTF2
  • Ring-Extending Base
 - RFDTXH2 RFDTXG2 RFDTXL2 RFDTXC2 RFDTXF2
RUGER American, Rimfire - 51H599H2 51H599G2 51H599L2 51H599C2 51H599F2
RUGER American, Non-Rimfire - 45T549H2 45T549G2 45T549L2 45T549C2 45T549F2
  • Ring-Extending Base
 - 45T549XH2 45T549XG2 45T549XL2 45T549XC2 45T549XF2
RUGER Automatic Pistol (Requires Drilling and Tapping) - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
RUGER Handguns With Level Mounting Rib - HRUGDTH2 HRUGDTG2 HRUGDTL2 HRUGDTC2 HRUGDTF2
RUGER Revolvers With Adjustable Sights BH(H/G/L/C)1 - - - - -
  • Ring-Extending Base
 BH3(H/G/L/C)1 - - - - -
RUGER Carbine RUG(H/G/L/C)1 RUGH2 RUGG2 RUGL2 RUGC2 RUGF2
RUGER Number One Not Equipped With Quarter Rib - #1H2 #1G2 #1L2 #1C2 #1F2
RUGER Number One With Quarter Rib - RUGDTH2 RUGDTG2 RUGDTL2 RUGDTC2 RUGDTF2
  • Rib-Replacing Base, 1-A, 1-AB, 1-RSI
 S#1R(H/G/L/C)1 - - - - -
  • Rib-Replacing Base, 1-B, 1-H, 1-S, 1-V
 L#1R(H/G/L/C)1 - - - - -
RUGER Number Three - #3H2 #3G2 #3L2 #3C2 #3F2
RUGER Short 77 - S77DTH2 S77DTG2 S77DTL2 S77DTC2 S77DTF2
RUGER Long 77, Express Rifle, 77 Magnum - 77DTH2 77DTG2 77DTL2 77DTC2 77DTF2
RUGER 77, Round Receiver L77(H/G/L/C)1 77H2 77G2 77L2 77C2 77F2
RUGER 77/17, 77/22, 77/44, 77/50, 96/44, PC9 - RUGDTH2 RUGDTG2 RUGDTL2 RUGDTC2 RUGDTF2
RUGER 10/22 1022(H/G/L/C)1 1022H2 1022G2 1022L2 1022C2 1022F2
RUGER 10/22 Magnum, 99/44, Ranch Rifle, Mini-14 - HRUGDTH2 HRUGDTG2 HRUGDTL2 HRUGDTC2 HRUGDTF2
SAKO Finn Scout, P-72, 78 (Screw Attachment) - 45T059H2 45T059G2 45T059L2 45T059C2 45T059F2
SAKO Finnwolf, 73 FW(H/G/L/C)1 45T088H2 45T088G2 45T088L2 45T088C2 45T088F2
SAKO TAPERED DOVETAILS: If not sure of action length, specify lengths of both front and rear dovetails.
SAKO L-461, Short 74, 75-I, 75-II (Dovetailed) - 461DTH2 461DTG2 461DTL2 461DTC2 461DTF2
SAKO L-579, Medium 74, 75-III,-IV,-V (Dovetailed) - 579DTH2 579DTG2 579DTL2 579DTC2 579DTF2
  • Short-Ring-Spacing Base
 - SRS579DTH2 SRS579DTG2 SRS579DTL2 SRS579DTC2 SRS579DTF2
SAKO L-61R, Long 74 (Dovetailed) - 61RDTH2 61RDTG2 61RDTL2 61RDTC2 61RDTF2
  • Short-Ring-Spacing Base
 - SRS61DTH2 SRS61DTG2 SRS61DTL2 SRS61DTC2 SRS61DTF2
SAKO, Round Receiver, Short* - HB461H2 HB461G2 HB461L2 HB461C2 HB461F2
SAKO, Round Receiver, Medium* - HB579H2 HB579G2 HB579L2 HB579C2 HB579F2
SAKO, Round Receiver, Long - HB61RH2 HB61RG2 HB61RL2 HB61RC2 HB61RF2
  • Ring-Extending Base
 - HB61RXH2 HB61RXG2 HB61RXL2 HB61RXC2 HB61RXF2
SAUER Bolt-Action, High-Power - SAURH2 SAURG2 SAURL2 SAURC2 SAURF2
  • Ring-Extending Base
 - 3T549XH2 3T549XG2 3T549XL2 3T549XC2 3T549XF2
  • 1/2" Screw-Spacing Front and Rear
 - 45H549H2 45H549G2 45H549L2 45H549C2 45H549F2
SAUER 200 - 45T539H2 45T539G2 45T539L2 45T539C2 45T539F2
  • Ring-Extending Base
 - 45T539XH2 45T539XG2 45T539XL2 45T539XC2 45T539XF2
SAUER 202 - 202H2 202G2 202L2 202C2 202F2
  • Ring-Extending Base
 - 202XH2 202XG2 202XL2 202XC2 202XF2
SAVAGE ANSCHUTZ Rimfires (Screw Attachment) 153(H/G/L/C)1 45H059H2 45H059G2 45H059L2 45H059C2 45H059F2
SAVAGE Striker Handgun (Bridge Flat) - 110H2 110G2 110L2 110C2 110F2
SAVAGE Sport Striker Handguns (Bridge Round Like Front) - Give Screw-Hole Spacings and Diameter of Receiver -
SAVAGE High-Power Bolt Actions With Bridge Round Like Front (6-48 Drilling) - 3T549H2 3T549G2 3T549L2 3T549C2 3T549F2
  • Ring-Extending Base
 - 3T549XH2 3T549XG2 3T549XL2 3T549XC2 3T549XF2
SAVAGE High-Power Bolt Actions With Bridge Round Like Front (8-40 Drilling) - 45T549#8H2 45T549#8G2 45T549#8L2 45T549#8C2 45T549#8F2
  • Ring-Extending Base
 - 45T549#8XH2 45T549#8XG2 45T549#8XL2 45T549#8XC2 45T549#8XF2
SAVAGE Small Caliber Rifles With Bridge Round Like Front - Give Screw-Hole Spacings and Diameter of Receiver -
SAVAGE 24V 24V(H/G/L/C)1 24VH2 24VG2 24VL2 24VC2 24VF2
SAVAGE 93, Mark II - 51H599H2 51H599G2 51H599L2 51H599C2 51H599F2
SAVAGE 99 99(H/G/L/C)1 99H2 99G2 99L2 99C2 99F2
SAVAGE Short 110, 111, 112 (Bridge Flat) S110(H/G/L/C)1 110H2 110G2 110L2 110C2 110F2
  • Ring-Extending Base
 - 110XH2 110XG2 110XL2 110XC2 110XF2
SAVAGE Short 110, Left-Hand (Bridge Flat) S110L(H/G/L/C)1 110H2 110G2 110L2 110C2 110F2
SAVAGE Long 110, 111, 112, 114, 116 (Bridge Flat) L110(H/G/L/C)1 110H2 110G2 110L2 110C2 110F2
  • Ring-Extending Base
 - 110XH2 110XG2 110XL2 110XC2 110XF2
SAVAGE Long 110, Left-Hand (Bridge Flat) L110L(H/G/L/C)1 110H2 110G2 110L2 110C2 110F2
SAVAGE 170 742(H/G/L/C)1 742H2 742G2 742L2 742C2 742F2
SAVAGE 210 Shotgun - 45T039H2 45T039G2 45T039L2 45T039C2 45T039F2
SAVAGE 210 Slug Gun (Bridge Flat) L110(H/G/L/C)1 110H2 110G2 110L2 110C2 110F2
SAVAGE 2400 - 461DTH2 461DTG2 461DTL2 461DTC2 461DTF2
SCHULTZ & LARSEN High-Power Bolt Action S&L(H/G/L/C)1 S&LH2 S&LG2 S&LL2 S&LC2 S&LF2
  • Ring-Extending Base
 - S&LXH2 S&LXG2 S&LXL2 S&LXC2 S&LXF2
SCHULTZ & LARSEN With 1/2" Screw-Spacing Front and Rear - BLRH2 BLRG2 BLRL2 BLRC2 BLRF2
SHILEN BP - SAURH2 SAURG2 SAURL2 SAURC2 SAURF2
SHILEN DGA - DGAH2 DGAG2 DGAL2 DGAC2 DGAF2
  • Ring-Extending Base
 - DGAXH2 DGAXG2 DGAXL2 DGAXC2 DGAXF2
SMITH & WESSON Firearms Made by Howa - See HOWA -
SMITH & WESSON K-, L-, N-Frame Revolvers KLN(H/G/L/C)1 - - - - -
SMITH & WESSON K-, L-, N-Frame Revolvers, 3-Ring Base KLN3(H/G/L/C)1 - - - - -
SMITH & WESSON No. 41 Pistol ULTM(H/G/L/C)1 ULTMH2 ULTMG2 ULTML2 ULTMC2 ULTMF2
SPRINGFIELD 1903 03(H/G/L/C)1 03H2 03G2 03L2 03C2 03F2
  • .22 Caliber
 - 03H2 03G2 03L2 03C2 03F2
  • Ring-Extending Base
 - 03XH2 03XG2 03XL2 03XC2 03XF2
SPRINGFIELD 1903-A3 A3(H/G/L/C)1 A3H2 A3G2 A3L2 A3C2 A3F2
SPRUNGFIELD ARMORY Model 2020 Short Action (Advise if 8-40 Screws) 722(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
SPRUNGFIELD ARMORY Model 2020 Long Action (Advise if 8-40 Screws) 721(H/G/L/C)1 700H2 700G2 700L2 700C2 700F2
  • Ring-Extending Base (Advise if 8-40 Screws)
 - 700XH2 700XG2 700XL2 700XC2 700XF2
SPRUNGFIELD ARMORY Model 2020 Rimfire (Advise if 8-40 Screws) - 45HT569H2 45HT569G2 45HT569L2 45HT569C2 45HT569F2
STEYR, Dovetailed Receiver - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
STEYR SBS, SM12 (0.860" Screw Spacing Front and Rear) - 1T567H2 1T567G2 1T567L2 1T567C2 1T567F2
STEYR-MANNLICHER SL, L (Short) - LH2 LG2 LL2 LC2 LF2
STEYR-MANNLICHER M (Medium) - MH2 MG2 ML2 MC2 MF2
STEYR-MANNLICHER M, Left-Hand (Medium) - MLH2 MLG2 MLL2 MLC2 MLF2
STEYR-MANNLICHER S, ST (Long) - STEYRH2 STEYRG2 STEYRL2 STEYRC2 STEYRF2
(STEYR) MANNLICHER-SCHONAUER M-72 - 72H2 72G2 72L2 72C2 72F2
STEYR Zephyr (16mm-Wide Dovetail, Half-Inch Long in Front) - LSAZDTH2 LSAZDTG2 LSAZDTL2 LSAZDTC2 LSAZDTF2
STEYR Zephyr (11mm-Wide Dovetail, Half-Inch Long in Front) - RFZDTH2 RFZDTG2 RFZDTL2 RFZDTC2 RFZDTF2
STEYR Zephyr II (11mm-Wide Dovetail, Inch Long in Front) - RFDTH2 RFDTG2 RFDTL2 RFDTC2 RFDTF2
STILLER Hunting Bolt Actions (6-48 Drilling) - 45T039H2 45T039G2 45T039L2 45T039C2 45T039F2
  • Ring-Extending Base
 - 45T039XH2 45T039XG2 45T039XL2 45T039XC2 45T039XF2
STILLER Hunting Bolt Actions (8-40 Drilling) - 45T039#8H2 45T039#8G2 45T039#8L2 45T039#8C2 45T039#8F2
  • Ring-Extending Base
 - 45T039#8XH2 45T039#8XG2 45T039#8XL2 45T039#8XC2 45T039#8XF2
TEXAS MAGNUM TMG(H/G/L/C)1 TMH2 TMG2 TML2 TMC2 TMF2
TEXAS MAGNUM, Left-Hand TMGL(H/G/L/C)1 TMH2 TMG2 TML2 TMC2 TMF2
TEXAS MAVERICK TMV(H/G/L/C)1 TMH2 TMG2 TML2 TMC2 TMF2
TEXAS MAVERICK, Left-Hand TMVL(H/G/L/C)1 TMH2 TMG2 TML2 TMC2 TMF2
THOMPSON/CENTER .22 Classic - 52E508H2 52E508G2 52E508L2 52E508C2 52E508F2
THOMPSON/CENTER Compass, Venture - 45T549H2 45T549G2 45T549L2 45T549C2 45T549F2
  • Ring-Extending Base
 - 45T549XH2 45T549XG2 45T549XL2 45T549XC2 45T549XF2
THOMPSON/CENTER Contender and Contender Carbine CTDR(H/G/L/C)1 - - - - -
  • 3-Ring Base
 CTDR3(H/G/L/C)1 - - - - -
  • 3-Ring Base for Short-Front Scopes
 SCTDR3(H/G/L/C)1 - - - - -
THOMPSON/CENTER Encore ENCOR(H/G/L/C)1 - - - - -
THOMPSON/CENTER Hawken, Renegade TC(H/G/L/C)1 - - - - -
THOMPSON/CENTER Icon - WVRDTH2 WVRDTG2 WVRDTL2 WVRDTC2 WVRDTF2
THOMPSON/CENTER TCR '83 TCR(H/G/L/C)1 - - - - -
TIKKA M-07, M-77K - RFDTXH2 RFDTXG2 RFDTXL2 RFDTXC2 RFDTXF2
TIKKA M-55, M-65, T3, T3x (Dovetailed Receiver) - LSADTH2 LSADTG2 LSADTL2 LSADTC2 LSADTF2
  • Screw-Attached Base
 - LSAH2 LSAG2 LSAL2 LSAC2 LSAF2
TIP-OFF RIMFIRE-TYPE GROOVED RECEIVERS (Open-Ended Grooves on Various Guns) - RFDTH2 RFDTG2 RFDTL2 RFDTC2 RFDTF2
  • Ring-Extending Base
 - RFDTXH2 RFDTXG2 RFDTXL2 RFDTXC2 RFDTXF2
ULTRA-LIGHT ARMS - ULAH2 ULAG2 ULAL2 ULAC2 ULAF2
  • Ring-Extending Base
 - ULAXH2 ULAXG2 ULAXL2 ULAXC2 ULAXF2
ULTRA-LIGHT ARMS With Bridge Round Like Front - 45T559H2 45T559G2 45T559L2 45T559C2 45T559F2
  • Ring-Extending Base
 - 45T559XH2 45T559XG2 45T559XL2 45T559XC2 45T559XF2
VOERE MAUSER FN(H/G/L/C)1 FNH2 FNG2 FNL2 FNC2 FNF2
  • Ring-Extending Base
 - FNXH2 FNXG2 FNXL2 FNXC2 FNXF2
VOERE Flat-Top Bolt-Action (Titan, Shikar) - VOERH2 VOERG2 VOERL2 VOERC2 VOERF2
  • Ring-Extending Base
 - VOERXH2 VOERXG2 VOERXL2 VOERXC2 VOERXF2
VOERE Titan II - K15H2 K15G2 K15L2 K15C2 K15F2
  • Ring-Extending Base
 - K15XH2 K15XG2 K15XL2 K15XC2 K15XF2
VOERE Titan Menor - 53H069H2 53H069G2 53H069L2 53H069C2 53H069F2
VOERE VEC 91 - KRICOH2 KRICOG2 KRICOL2 KRICOC2 KRICOF2
  • Ring-Extending Base
 - KRICOXH2 KRICOXG2 KRICOXL2 KRICOXC2 KRICOXF2
VOERE 2000 (Rimfire, Screw Attachment) - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
WEATHERBY Silhouette Pistol VM(H/G/L/C)1 VMH2 VMG2 VML2 VMC2 VMF2
WEATHERBY Mark V (With Nine Locking Lugs) MKV(H/G/L/C)1 MKVH2 MKVG2 MKVL2 MKVC2 MKVF2
  • Ring-Extending Base
 - MKVXH2 MKVXG2 MKVXL2 MKVXC2 MKVXF2
WEATHERBY Mark V, Left-Hand MKVL(H/G/L/C)1 MKVH2 MKVG2 MKVL2 MKVC2 MKVF2
  • Ring-Extending Base
 - MKVXH2 MKVXG2 MKVXL2 MKVXC2 MKVXF2
WEATHERBY Mark XXll (Can Also Use RFDT-2 Bases if Grooved) - 2H589H2 2H589G2 2H589L2 2H589C2 2H589F2
WEATHERBY Light-Weight Mark V (Six Locking Lugs) - LWMKVH2 LWMKVG2 LWMKVL2 LWMKVC2 LWMKVF2
  • Ring-Extending Base
 - LWMKVXH2 LWMKVXG2 LWMKVXL2 LWMKVXC2 LWMKVXF2
WEATHERBY Vanguard, Long Action MKV(H/G/L/C)1 MKVH2 MKVG2 MKVL2 MKVC2 MKVF2
  • Ring-Extending Base
 - MKVXH2 MKVXG2 MKVXL2 MKVXC2 MKVXF2
WEATHERBY Vanguard, Short Action L77(H/G/L/C)1 77H2 77G2 77L2 77C2 77F2
WEATHERBY Varmintmaster (Original Model) VM(H/G/L/C)1 VMH2 VMG2 VML2 VMC2 VMF2
WEAVER-RING MOUNTING SYSTEMS (Various Guns) - WVRDTH2 WVRDTG2 WVRDTL2 WVRDTC2 WVRDTF2
WHITE MUZZLELOADER "W" Series* - HB579H2 HB579G2 HB579L2 HB579C2 HB579F2
WICHITA Mounting dimensions have been changed on all guns. Former stock numbers no longer apply. Describe each gun and give all screw spacings. We will fit as best we can.
WINCHESTER Shotguns - 45T029H2 45T029G2 45T029L2 45T029C2 45T029F2
WINCHESTER Shotguns With 1/2" Screw-Spacing Front and Rear - 45H019H2 45H019G2 45H019L2 45H019C2 45H019F2
WINCHESTER 43 - 31H389H2 31H389G2 31H389L2 31H389C2 31H389F2
WINCHESTER 52 With Different Screw Spacing Front and Rear 52(H/G/L/C)1 52H2 52G2 52L2 52C2 52F2
WINCHESTER 52, 61 With Same Screw Spacing Front and Rear - 45T559H2 45T559G2 45T559L2 45T559C2 45T559F2
  • Ring-Extending Base
 - 45T559XH2 45T559XG2 45T559XL2 45T559XC2 45T559XF2
WINCHESTER 54 and Pre-War 70 Before Serial No. 66,350 (Shallow Longitudinal Trench Atop Rear Receiver) 54(H/G/L/C)1 54H2 54G2 54L2 54C2 54F2
  • Ring-Extending Base
 - 54XH2 54XG2 54XL2 54XC2 54XF2
WINCHESTER 63 (Screw Attachment) - 45H059H2 45H059G2 45H059L2 45H059C2 45H059F2
WINCHESTER 70, Standard (Same Screw Spacing Front and Rear) 70(H/G/L/C)1 70H2 70G2 70L2 70C2 70F2
  • Ring-Extending Base
 - 70XH2 70XG2 70XL2 70XC2 70XF2
WINCHESTER 70 Short Action (for WSM Calibers) - 70H2 70G2 70L2 70C2 70F2
WINCHESTER 70 Super-Short (for WSSM Calibers) - SS70H2 SS70G2 SS70L2 SS70C2 SS70F2
WINCHESTER 70 With Rear Screw-Spacing .330" 70M(H/G/L/C)1 70MH2 70MG2 70ML2 70MC2 70MF2
  • Ring-Extending Base
 - 70MXH2 70MXG2 70MXL2 70MXC2 70MXF2
WINCHESTER 70 With Rear Screw-Spacing .330", Left-Hand (Bridge Base Uses Only One Rear Attachment Screw) E70ML(H/G/L/C)1 70MH2 70MG2 70ML2 70MC2 70MF2
  • Ring-Extending Base
 - 70MXH2 70MXG2 70MXL2 70MXC2 70MXF2
WINCHESTER 70 With Rear Screw Spacing .435" E70M(H/G/L/C)1 E70MH2 E70MG2 E70ML2 E70MC2 E70MF2
  • Ring-Extending Base
 - E70MXH2 E70MXG2 E70MXL2 E70MXC2 E70MXF2
WINCHESTER 70 With Rear Screw Spacing .435", Left-Hand E70ML(H/G/L/C)1 E70MH2 E70MG2 E70ML2 E70MC2 E70MF2
  • Ring-Extending Base
 - E70MXH2 E70MXG2 E70MXL2 E70MXC2 E70MXF2
WINCHESTER 88, 100 88(H/G/L/C)1 88H2 88G2 88L2 88C2 88F2
WINCHESTER 670 70(H/G/L/C)1 70H2 70G2 70L2 70C2 70F2
WINCHESTER XPR - XPRH2 XPRG2 XPRL2 XPRC2 XPRF2
  • Ring-Extending Base
 - XPRXH2 XPRXG2 XPRXL2 XPRXC2 XPRXF2
WINCHESTER 1885 - See BROWNING -
ZOLI Over-and-Under Valmet - RFDTXH2 RFDTXG2 RFDTXL2 RFDTXC2 RFDTXF2
ZOLI AZ-1900 CG(H/G/L/C)1 CGH2 CGG2 CGL2 CGC2 CGF2
  • Ring-Extending Base
 - HVAXH2 HVAXG2 HVAXL2 HVAXC2 HVAXF2
 *Requires rings of different heights, either a Low and a Medium or a Medium and a High. Unless specifically mentioned, 30mm rings may require shimming.
**Requires a Low and a High ring. Unless specifically mentioned, 30mm rings likely require shimming.

NOTE:

The last two characters of each stock number indicate grade (Huntur, Gunnur, Limited, Custum, or Fluted) and number of pieces. For stainless steel, add -SS after the stock number. Not all bases are available in stainless steel.

Ring-extending or short-ring-spacing bases are designed for certain scopes that may be too short for a standard Conetrol mount. The rear Conetrol ring typically sits just behind the shell ejection port, the front ring maybe an inch or so ahead of the port (between the two front screw holes for most screw-attached bases). If your scope would not allow this, you should order a ring-extending or short-ring-spacing base.

Conetrol mounts are available for virtually any firearm made that will take a conventional top mount low over the receiver. If your gun is not listed among the popular models above, we might be able to identify a special combination of our two-piece bases that will work for you. Contact us with full particulars.
 
Ring Stock Numbers
Solid Rings for 1" Scopes*
  Low Med High Extra-High
Huntur 4H1 8H1 12H1 -
Gunnur 4G1 8G1 12G1 -
Limited 4L1 8L1 12L1 -
Custum 4C1 8C1 12C1 -
Solid Rings for 26mm Scopes*
  Low Med High Extra-High
Huntur 3H1 7H1 11H1 -
Gunnur 3G1 7G1 11G1 -
Limited 3L1 7L1 11L1 -
Custum 3C1 7C1 11C1 -
Solid Rings for 26.5mm Scopes*
  Low Med High Extra-High
Huntur 2H1 6H1 10H1 -
Gunnur 2G1 6G1 10G1 -
Limited 2L1 6L1 10L1 -
Custum 2C1 6C1 10C1 -
Split Rings for 1" Scopes
  Low Med High Extra-High
Huntur 4H3 8H3 12H3 32H3
Gunnur 4G3 8G3 12G3 32G3
Limited 4L3 8L3 12L3 32L3
Custum 4C3 8C3 12C3 32C3
Split Rings for 26mm Scopes
  Low Med High Extra-High
Huntur 3H3 7H3 11H3 -
Gunnur 3G3 7G3 11G3 -
Limited 3L3 7L3 11L3 -
Custum 3C3 7C3 11C3 -
Split Rings for 26.5mm Scopes
  Low Med High Extra-High
Huntur 2H3 6H3 10H3 -
Gunnur 2G3 6G3 10G3 -
Limited 2L3 6L3 10L3 -
Custum 2C3 6C3 10C3 -
Split Rings for 30mm Scopes
  Low Med High Extra-High
Huntur 30H3 50H3 70H3 130H3
Gunnur 30G3 50G3 70G3 130G3
Limited 30L3 50L3 70L3 130L3
Custum 30C3 50C3 70C3 130C3
Split Rings for 34mm Scopes
  Low Med High Extra-High
Huntur - 64H3 - -
Gunnur - 64G3 - -
Limited - 64L3 - -
Custum - 64C3 - -
Split Rings for 35mm Scopes
  Low Med High Extra-High
Huntur - 65H3 - -
Gunnur - 65G3 - -
Limited - 65L3 - -
Custum - 65C3 - -

*Solid (one-piece) rings will not fit most scopes. Solid rings require a scope with a straight tube on one end all the way to the end of the scope (no expanded lens bell). On such scopes, one solid ring may be used.

NOTE:

To order Conetrol rings in stainless steel, add -SS after the stock number. Only 1", 30mm, 34mm, and 35mm split rings are available in stainless steel.

For 1", 26mm, and 26.5mm rings, the number preceding the letter in each stock number is the height of the ring in 64ths of an inch. The letter gives the grade, and the final number indicates the type: solid or split. For example, 8G3 is a one-inch Gunnur split ring (3 parts) that places the scope tube 8/64" (or 1/8") above the top of the base. For 30mm, 34mm, and 35mm rings, the first digit or digits (ignore the digit just before the letter) give the ring height in millimeters. For example, 70C3 is a 30mm Custum split ring that places the scope tube 7mm above the top of the base.

Conetrol bases are normally 7/32" thick (5.6mm) above the highest part of the receiver. This distance plus ring height (1/16"-3/16" for our standard 1-inch rings, 3mm-7mm for our standard 30mm rings, etc.) is how high the mounted scope would sit above the highest part of the receiver. Thus, the bottom of a 1" scope tube would sit 9/32", 11/32" or 13/32" above the highest part of the receiver with low, medium, or high 1" rings, respectively. The bottom of a 30mm scope tube would sit 8.6mm, 10.6mm, or 12.6mm above the highest part of the receiver.

Conetrol mounts have traditionally been very low and were often unable to accomodate scopes with very large objectives. For this reason, we've recently introduced Extra-High 1" and 30mm rings. Extra-High 1" rings (1/2" high) would place the bottom of a 1" scope tube 23/32" above the highest part of the receiver. Extra-High 30mm rings (13mm high) would place the bottom of a 30mm scope tube 18.6mm above the highest part of the receiver.

HELPFUL HINT: Drill bits of different diameters can help you estimate the minimum mounting height required for a scope. Place the scope in mounting position above the receiver, keeping the scope aligned with the boreline of the barrel. One at a time, insert drill bits of different diameters between the highest part of the action and the scope. The smallest bit that allows adequate clearance is the minimum height you need. Base height plus ring height should be at least this distance. If you have time, you might want to order the base first to help you determine what ring height you will need.

email@conetrol.com | 830-379-3030